T-3 1/4 Bulb*
  

Line
No.

Part
Number

Category

Base Type

Design
Volts

Design
Watts

MSCD

Filament
Type

Rated
Life

Fig No.

Foot
Notes










880ST   Axial 12  27  45  C-6 100  117   
886   Right-Angle 12  50  105  C-6 200  122   
889   Right-Angle 12  27  45  C-6 300  120   
890   Axial 12  27  45  C-6 300  116   
893   Axial 12  37.5  78.3  C-6 200  117   
893 ST   Axial 12  37.5  78.3  C-6 100  117   
896   Right-Angle 12  37.5  78.3  C-6 200  118   
64146BC   PKZ22s 12  35  65  C-6 400  121   
64151 H3  PK22s 12  55  121  C-6 310  123   
10  64151ST (H3 ST) H3  PK22s 12  65  89  C-6 115  123   
11  64153   PKY22s 12  100  192  C-6 50  124   
12  64210 H7  PX26d 12  55  125  C-8 270  125   
13  64210 (H7 CB) H7  PX26d 12  55  120  C-8 135  125   
14  64210 LL (H7 LL) H7  PX26d 12  55  125  C-8 520  125   
15  64210(H7 SU) H7  PX26d 12  55  125  C-8 85  125   
16  64210ST (H7 ST) H7  PX26d 12  55  125  C-8 85  125   
17  880   Axial 12.8  32  45  C-6 300  117   
18  881   Right-Angle 12.8  32  45  C-6 300  118   
19  885   Axial 12.8  50  105  C-6 200  119   
20  894   Right Angle 12.8  37.5  75  C-6 200   
21  898   Right Angle 12.8  37.5  60  C-6 1900   
22  899   Axial 12.8  37.5  60  C-6 2,000  117   
23  64156 H3  PK22s 24  70  146  C-6 225  123   


     * These halogen lamps conform to ANSI publication C78/390, 1983 Document C78/3081.

 
Caution : Operates under pressure and may shatter. Use appropriate screening techniques to protect people and surroundings. Do not operate in close proximity to persons, combustible materials, or substances affected by heat or drying. Do not operate over 110% rated voltage because such operation increases pressure and lamps' tendency to shatter. Ultraviolet output may cause skin and eye irritation with prolonged exposure. Protect bulb from abrasions and scratches. Do not insert lamps when power is on. Follow operating instructions.